接待惠临乐清市美格尔电子电器无限公司官方网站!

>美格尔

接洽咱们

  • 接洽德律风:

    0577-62875133

  • 传真:

    0577-62987133

  • E-mail:

    mgr@mgr.top

单相固态继电器

以后地位:首页 > 产物总汇 > 产物中间 > 单相固态继电器

MGR-1DD60D 直流固态继电器

所属:单相固态继电器

产物先容

◎ 型号寄义 Type meaning

`image.png`/

① 1 路 One channel

② 节制电压 3-32VDC Control voltage 3-32VDC

③ 直流控直流 DC-DC (DC input-DC output)

④ 负载电压 5-60VDC

Load voltage 5-60VDC

⑤ 200A, 300A, 400A, 600A


◎ 产物概述 Product overview

◆ 直流固态继电器易并联,合适大电流利用场所

◆ 额定电流:200A-600Amps

◆ 额定电压:5-60VDC

◆ 节制电流:≤ 40mA

◆ 低输入断态泄电流

◆ 低阻抗 MOSFET 输入,最大限制削减总功耗

◆ 合适阻性负载和理性负载 ( 理性负载如机电和 EMR/电磁线圈等必须加装按捺二极管 )

◆ 具备 LED 灯输入唆使

◆ 包罗规范输入的 R-C 缓冲器

◆ 通明掩护盖为用户供给额定掩护


◆ DC solid state relays are easy to connect inparallel, suitable for high current applications

◆ Rated current: 200A-600Amps

◆ Rated voltage: 5-60VDC

◆ Control current: ≤ 40mA

◆ Low output off-state leakage current

◆Low-impedance MOSFET as the output component minimize the total power consumption

◆ Suitable for resistive load and inductive load (the inductive load, such as motor and EMR / electromagnetic coil, must be equipped with the suppressor diode)

◆ Display output status via LED

◆ Standard output R-C buffer

◆ Transparent cover for extra protection


注重 :

1. 当负载电流为 10A 时 , 必须加装散热器 ; 为 40A 及以上时 , 必须加电扇强冷或水冷 .

2. 利用理性负载时 , 务必在输入端并接一个压敏电阻 , 取值为负载电压的 1.6-1.9 倍 .


Notice:

1. If the load current is 10A, a heat sink must be equipped; if the load current is 40A or more, an air-cooled radiator or a water-cooled radiator must be installed.

2. When the load is an inductive load, be sure to connect a varistor in parallel with the output terminal, whose voltage value is 1.6-1.9 times the load voltage.


◎ 装置尺寸及接线图 Installation dimensions and wiring diagram

`image.png`/

注:特别电压可定做。Note: Specific voltage can be customized.


存眷微型平台

Copyright © 2020 乐清市美格尔电子电器无限公司 All Rights Reserved 版权. 浙ICP备0522718号手艺撑持:即商通JST